The Iron & General Fallout Remover dissolves fallout and brake dust fast, does not damage coatings, and has a high cling formula. In addition to its exceptional fallout removing function, it also has a corrosion inhibitor plus, an additive designed to combat the effects of acid rain.

It is a thick gel-like formula that will cling to vertical surfaces.

•Use in a well ventilated area out of direct sunlight as the product has a very strong and unpleasant odor. •Remove loose dirt using a hose or jet wash. •Spray the Iron & General Fallout Remover directly onto the surface and allow to dwell for 5-10 minutes. During this time any ferrous particles will dissolve forming a purple solution. Do not allow product to dry on the surface. Rinse residue and repeat if necessary. In extreme cases you can also agitate the surface with a Microfiber Buff Cloth.